What Are Hand Spraying Conformal Coatings?

Manual spraying is suitable for maintenance and small-scale production, the biggest advantage is small investment, easy to operate.

Manual spraying is suitable for maintenance and small-scale production, the biggest advantage is small investment, easy to operate.

Product characteristics of hand spraying conformal coating:
1. No ratio, no need to dilute, directly spray after fully shaking, simple operation, a spray can be.
2. Containing fluorescent agent, easy to monitor, to avoid the PCB board partial components of the leakage coating.
3. Low odor environmental protection, quality assurance. In line with the EU ROHS environmental protection standards, through the ISO9001 quality management system certification.
4. With excellent moisture, anti-mold, anti-salt spray, anti-corrosion, electrical insulation, anti-leakage and other properties.

Method of application:

1.  Clean the covered surface first, remove dust, oil, rust, etc.
2.  Before and during use, fully shake, nozzle distance from the target 15-30cm evenly spray, keep the coating thin and uniform.
3. If you want to get a thicker coating, you can continue to spray after the first layer is dry, the two spraying should be separated by 30 minutes, the first layer of paint dry, so that the second painting is more convenient and better.
4. After spraying, the sprayed material will be left for 24 hours, until it is fully cured (can also be heated curing)

Precautions for the use :

1. Before sizing, the circuit board should be dehumidified in a high humidity environment.
2. This product contains a slight smell, slight irritation to the skin and eyes, if accidentally splashed into the eyes, please rinse immediately with plenty of water, if still discomfort should go to the hospital for examination; Wash immediately after skin contact with soap and plenty of water.
3. Use chemical protective gloves and glasses when necessary.
4. The products contain pressure gas, please keep away from heat source and open flame; Do not puncture, impinge or burn aerosol canisters.