First, gather all the materials you will need to shrink the PVC film. This includes the PVC film, a heat source (such as a hair dryer or heat gun), a pair of scissors, and a flat surface to work on.
Next, measure the size of the object you want to wrap with the PVC film and cut the film to the appropriate size. Make sure to leave some extra room around the edges to allow for shrinking.
Once the film is cut to size, place it over the object and use the heat source to apply heat evenly to the film. Start at one end and work your way across the film, holding the heat source about 2-3 inches away from the surface of the film.
As you apply heat, you will start to see the PVC film shrink and conform to the shape of the object underneath. Continue to apply heat until the film is tightly wrapped around the object and all wrinkles have disappeared.
Finally, allow the PVC film to cool completely before handling the wrapped object. This will help the film to set in its new shape and ensure a secure fit.
If desired, you can trim any excess film from the edges of the wrapped object for a cleaner look. You can also use a heat source to smooth out any remaining wrinkles or imperfections in the film.
By following these steps, you can effectively shrink PVC film at home to wrap objects of various shapes and sizes. Remember to work carefully and safely when using heat sources, and always allow the film to cool before handling the wrapped object.
If you are looking for more details, kindly visit po shrinkage film manufacturers, printed shrink wrap packaging, does plastic shrink when heated.